Perfect Bows in 4 Easy Steps

From presents to pretty ribbons on centerpieces, ribbon bows are sure to make any event spectacular!

No matter what your use for ribbon rolls, whether it’s for a wedding or a corporate event, knowing how to tie a bow is extremely valuable. Here are a few easy-to-follow four-step ribbon bows to tie to meet any need you may have.

use single face satin ribbons for bows on candles and other centerpiecesClassic (or Traditional) Bow

The first bow, and probably the easiest to tie, is a classic, go-to look. It’s the same type of bow we all know from when we learned how to tie our shoes as children.

Step 1: Choose the desired ribbon length and form two loops.
Step 2: Cross the left loop over the right loop making sure that the ribbon tails stay in the back.
Step 3: Wrap the left loop around the right loop and pull it through the opening created.
Step 4: Adjust the tails and loops to the desired effect and tighten the knot.

Your bow is ready! Use classic bows for presents, candle centerpieces, utensils and other items that need to be held together, or that can fit into the opening created by forming this bow.

double face satin is perfect for dior bows and personalized ribbonsDior (or Layered) Bow

Not only are Dior bows extremely elegant, but they are also classic and useful. This bow works well with single face satin ribbons.

Step 1: Cut several pieces of ribbon from a roll making each strip two inches longer than the previous.
Step 2: Lay each ribbon piece face down and fold the ribbon ends to the center. Using double stick tape or glue, adhere these ends in place.
Step 3: Stack the looped ribbons one on top of the other starting with the largest on the bottom. Either use double stick tape or glue to hold them in place.
Step 4: Thread a long ribbon strip through the center loop and wrap it around whatever you are fastening the bow onto.

These bows are pretty attached to packages and presents.

satin acetate and organza ribbons for pew bows go great with personalizationPom-Pom (or Rosette) Bow

This bow is a classic pom-pom bow with tails. To make this bow, you will need one very long piece of ribbon. Personalized or printed ribbon is a nice look for this type of bow.

Step 1: Wrap the ribbon around your hand or another object 8 to 10 times.
Step 2: While holding the wrapped ribbon, use scissors to create a small notch on both sides of the center of the ribbon. Make sure to cut every layer.
Step 3: Secure the ribbon in the center by using florist wire wrapped in the notches.
Step 4: Spread out your loops to create a pom-pom effect. The longer the piece of ribbon, the fuller and bigger the bow will be.

This bow is fun and fancy! And, for an added touch, combine two pom-pom bows made from different ribbon types together for a pew or chair bow. The tails on these bows are great for accent pieces for presents and decorations.

So, no matter your ribbon, make sure to have fun with it. And now you can start creating perfect bows for anything.

Leave a Reply

Your email address will not be published.